Replacing the backup battery, Replacing the backup battery 158 – Konica Minolta BIZHUB C30P User Manual

Page 172

Text mode
Original mode

Replacing Consumables

158

Close the front cover.

Reset the counter in the

MAINTENANCE MENU/SUPPLIES/

REPLACE/TRANS. BELT

menu.

Replacing the Backup Battery

If the backup battery is dead, the printer’s date and time cannot be retained.
Follow the procedure described below to replace the backup battery.

Note

It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.

Turn off the printer and discon-
nect the power cord and inter-
face cables.