Konica Minolta BIZHUB C30P - Manual (Page 255)

Lower Feeder Unit 241
4
With another person’s help,
place the printer on top of the
lower feeder unit, making sure
that the positioning pins on the
lower feeder unit correctly fit into
the holes on the bottom of the
printer.
"
If two lower feeder units are to be installed, stack the two lower
feeder units and secure them together before installing them to the
printer.
WARNING!
This printer weighs approximately 44 kg (97.0 lb) when it is fully loaded
with consumables. The printer must be lifted by two people.
5
Using a screwdriver, install the
two securing brackets at the rear
of the printer.
44 kg
97 lbs