Kathrein UFD 170 - Manual (Page 67)

Change of Location
67
If you still want to aim at the satellite, press

to start the search.
After a change of location, the antenna moves to the last position
selected. After initialisation, you will therefore see the following display
(example, as it depends on the position last selected):
After a successful search, the following message appears:
If a signal is found, the antenna automatically goes into the fi ne
tuning mode (max. 90 seconds, if signal is adequate, the position is
immediately saved).
For slight changes of location,
the antenna can fi nd the satellite
very quickly.
If no signal is found at the last position, the following message
appears: