Adding/deleting satellites, Deleting satellites – Kathrein UFD 170 User Manual

Page 43

Adding/Deleting Satellites

You can now make entries corresponding to your receiving system
in the relevant positions using the cursor keys (



You can now make entries corresponding to your receiving system

) and

the number keys. For details of how you can change the satellite

name using the number keys, refer to the “Alphanumeric Assignment

of Remote Control Number Keys” section.

Note:

For each point, you can press the



key to view a brief

explanation.

Deleting Satellites

As described under “Setting Up Satellites”, switch to the “LNB
Conﬁ guration” menu. Use the



keys to move the

cursor bar to the satellite you want to delete. Press the



keys to move the



keys to move the

key.

You will now be asked whether you are sure you want to delete the
satellite, and you can either conﬁ rm with



or cancel with

