Kathrein UFD 170 - Manual (Page 61)

Connection Diagram
61
1
2
No. Connection between Type of connection
1 Antenna and UFD 170 SAT-IF input SAT-IF connection (coaxial cable with standard F connector)
2 UFD 170 and power source Using connecting cable supplied
3 UFD 170 and turntable Using supplied (control) data cable
4 UFD 170 and turntable Power supply with power supply cable supplied
5 UFD 170 and TV set Connection with cinch-cinch cable supplied
6 UFD 170 and hi-fi system Connection can be via cinch cable (not included)
7 UFD 170 and Dolby Digital system Connection can be via cinch cable (not included)
8 SAT-ZF output Control unit and SAT-IF
input Receiver
Supplied with connection already set up; required for
communication between receiver and control unit in UFD 170
9 Receiver and infrared receiver Connection via cable for infrared receiver supplied
0 Antenna and receiver SAT-IF input SAT-IF connection option if UFD 170 is intended for stationary use
(e.g. in an apartment)
3
4
0
9
8
5 6 7
brown
white
green
Ignition
Battery