Konica Minolta 505si - Manual (Page 6)

9
QUICK OPERATION
8
QUICK OPERATION
1. Insert batteries.
• This camera uses two CR2 lithium
batteries.
2. Attach lens.
• Align the red mounting dot on the lens
with the one on the camera. Gently
insert the lens into the mount and turn it
clockwise until it clicks into the locked
position.
4. Load film.
• Align the film tip with the red mark, then
close the back cover.
5. Set Full-Auto operation.
• Press the program-reset button to set the
camera to fully-automatic operation.
6. If using a zoom lens, rotate
the zooming ring to frame
your subject as desired.
7. Center your subject in the
focus frame.
• The camera will focus and set exposure
automatically.
8. Take the picture.
• Gently press the shutter-release button
all the way down to take the picture.
3. Slide the main and eye-start
switches to ON.