Konica Minolta 505si - Manual (Page 21)

38
In this section you take full creative control of your
camera. Depending on the selected exposure mode, you
will control the aperture, shutter speed, or both when
capturing your image.
In the previous sections, only the Program (P) exposure
mode has been explored. Here you will learn to use the
Aperture Priority (A), Shutter Priority (S), and Manual (M)
exposure modes. Select A-mode to control the depth-of-field
in your images. Set S-mode to control the way moving
subjects appear in your images. Set M-mode when you want
full control over all the exposure functions.
A-Mode Manually select aperture 40
S-Mode Manually select shutter speed 43
M-Mode Manually select the shutter speed 46
and the aperture
• Each exposure mode can be explored independently.
LEVEL III
CONTINUOUS - ADVANCE MODE
1. Press the drive-mode button
until appears in the data
panel.
2. Press the shutter-release
button down and hold.
• When taking flash pictures, the shutter will
release after the flash is charged.
• When the subject is moving, the shutter will
release after the camera focuses on the
subject.
• To return to single frame mode, press the
drive mode button until appears in the
data panel.
In this mode, the camera continues to
release the shutter and advance the
film as long as the shutter-release
button is held down.
• AF Zoom xi and Power zoom lenses
cannot be zoomed when continuous-
advance mode is selected.