Samsung TXN3275HF/TXN2670WHF - Manual (Page 30)

30
O
P E R AT I O N
3
Press the ENTER button.
The TV will begin
memorizing all of the
available channels.
After all the available
channels are stored, the
Auto program menu reap-
pears. Press the MENU
button to exit.
Storing Channels in Memory (Automatic Method)
▼
The TV automatically cycles
through all of the available channels
and stores them in memory. This
takes about one to two minutes.
Press MENU at any time to interrupt
the memorization process and return
to the Channel menu.
2
Press the ▲ button to
select “Auto program”.
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps 1~2
on previous page.
Note: Channel auto program does not function when the V-chip is active.