Samsung TXN3275HF/TXN2670WHF - Manual (Page 11)

11
Y
O U R
N
E W
T V
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 13 – 22.
ΠAUDIO-VIDEO MONITOR
OUTPUT jacks
Connect to the audio/video input jacks of a
recording VCR.
Note: The Monitor Out does not operate in
Component 1 or 2 modes.
´,¨,ˆAV INPUT jacks
Video and Audio signals from VCRs, DVD players
and similar devices.
Note: The common jack of component 1 and
AV2, component 2 and AV3 input jacks are
exclusive relation with each other.
ˇ COMPONENT 1 INPUT jacks
(480i/480p/1080i)
Connect to the audio and component output
jacks of a DVD player or Set-Top Box.
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
• TXN2745FP/TXN3245FP: 480i/480p only.
Ø COMPONENT 2 INPUT jacks
(480i/480p/1080i)
Connect to the audio and component output
jacks of a DVD player or Set-Top Box.
Note: Only black and white signals are output
from a monitor in DVD/DTV mode.
• TXN2745FP/TXN3245FP: 480i/480p only.
∏ VHF/UHF jack
Connect to an antenna or to a cable TV system.
” SUB-WOOFER SPEAKER
OUTPUT jack
(TXN3298HF/TXN3098WHF/
TXN2798HF)
Connect to the Sub-woofer speaker jack (built in
Sub-woofer cable).
’ DVI AUDIO INPUT jacks
(TXN3298HF/TXN3098WHF/
TXN2798HF)
Receives the digital audio signals from a set top
box.
˝ DIGITAL INPUT (Digital
Visual Interface) jack
(TXN3298HF/TXN3098WHF/
TXN2798HF)
Receives the digital video signals from a set top
box.