Sony PEG-SJ20 - Manual (Page 24)

Chapter 1 Basic operations of your Sony CLIÉ Handheld
24
Adjusting the screen
You can turn the backlight on or off, and adjust the contrast (PEG-SL10/
PEG-SJ20) or brightness (PEG-SJ30) according to the lighting conditions or
temperature of the environment where you use your CLIÉ handheld.
Turning the backlight off and on
Press and hold down the POWER button for more than two seconds to turn
the backlight off or on.
Adjusting the contrast or brightness
Using the onscreen contrast (PEG-SL10/PEG-SJ20) or brightness (PEG-SJ30)
control, adjust the screen contrast or brightness as follows:
1
Tap 6 for PEG-SL10/PEG-SJ20 or 8 for PEG-SJ30.
The adjustment control screen is displayed.
2
To change the level in small increments, tap to the left or
right.
To change the brightness/contrast level in larger increments,
drag the slider to the left or right.
Tip
You can also press the scroll button or rotate the Jog Dial navigator to move the
slider incrementally.
3
Tap Done.
Note
If the digitizer is not configured correctly, you may not be able to make the
adjustments properly. For details, see “Turning on your Sony CLIÉ Handheld for
the first time” in the Read This First manual.
Tap this icon. Tap this icon.
PEG-SJ30 PEG-SL10/PEG-SJ20