Sony PEG-SJ20 - Manual (Page 178)

178 Chapter 5 Customizing your Sony CLIÉ Handheld (Preferences)
6
Enter the IP address for the Primary and Secondary DNS
(Domain Naming System).
Ask your Internet Service Provider or System Administrator for the
correct Primary or Secondary DNS IP numbers.
7
If you need to enter the CLIÉ handheld’s IP Address, tap the IP
Address check box to deselect it and display a permanent IP
address field below the check box.
Normally, you do not have to enter this IP address. If you are not sure,
select Automatic and go to step 9.
8
Enter the CLIÉ handheld’s IP Address.
9
Tap OK.
Creating log in scripts
A log in script is a series of commands that automates logging in to a
network server, such as your corporate network or your Internet Service
Provider (ISP). A log in script is something that you are likely to receive
from your IS System Administrator, if your company has a system in which
you log in to the corporate servers from your CLIÉ handheld using a modem
or network connection.
Note
You can also use non-ASCII and literal characters in your log in script. For more
information, see page 180.
1
On the Network Preferences screen, tap the service field.
2
Tap Details.
The Details screen is displayed.
3
Tap Script.
The Log in Script screen is displayed.
Changing the Network preferences
Continued on next page