Sony CMR-PC2 USB - Manual (Page 16)

16
Shooting Still Pictures with the Camera
Application software is used to shoot pictures. Be sure to install the
application software in advance.
1
Connect your camera.
You can connect or disconnect your camera to and from the
computer while the computer is powered on. For details, see
“Connecting the CMR-PC2 USB/CMR-PC3 USB to a Computer”
(page 12) or “Connecting the CMR-PC4 USB to a Computer”
(page 13).
2
Start the application software.
3
Turn the focus ring to adjust the focus.
4
Press the CAPTURE button to shoot pictures (CMR-PC2 USB
only).
In addition to attaching the camera to the computer, you can also
use it held in hand as shown in the figure to shoot from various
angles.
z
• The CMR-PC3 USB and the CMR-PC4 USB can capture still pictures through the
“SONY USB CAMERA Still Capture” application.
• When using the CMR-PC2 USB to capture still pictures, you can confirm the picture
before actually capturing it by pushing the CAPTURE button half way in.
• Whether or not still pictures can be shot, depends on the application software.
CMR-PC2 USB
CMR-PC3 USB
CMR-PC4 USB