SMC Networks Wireless Broadband Router - Manual (Page 35)

-34-
receive any data through the Wireless Barricade. Choose "Allow" or "Deny" to allow or
deny clients whose MAC addresses are not listed in the "Control table"
When a wireless client CAN "Associate" to the wireless LAN, and CAN "Connect" to the
Wireless Barricade, that means it can have full access to the Internet and Network
Resources.
When a wireless client CAN NOT "Associate" to the wireless LAN, it means that it CAN
NOT:
1. Communicate with any others clients on the LAN (neither wired nor wireless)
2. Connect to the Internet
3. Use the Print Server function
4. Use the Wireless Barricade’s Web configuration
5. “Connect” to the Wireless Barricade
When a wireless client CAN "Associate" to the wireless LAN, but CAN NOT "Connect"
to the Wireless Barricade, it means that it CAN:
1. Communicate with others clients on the wireless LAN
But CAN NOT:
1. Communicate with any clients on the wired LAN
2. Connect to the Internet
3. Use the Print Server function
4. Use the Wireless Barricade’s Web configuration
Association control has no effect on wired clients.
Control table
"Control table" is at the bottom of the "MAC Address Control" page. Each row of this