Sharp DT-500 - Manual (Page 24)

Connections
23
Connecting to Video Equipment
Before connecting, ensure that the power cord of the projector is unplugged from the AC
outlet and turn off the devices to be connected. After making all connections, turn on the
projector first and then the other devices.
When connecting the component video equipment to the component input termi-
nal on the projector (INPUT1 or INPUT2)
Component cable
(commercially available)
To component output
(Y, C
B /P B , C R /P R ) terminal
To INPUT1 or INPUT2 terminal
DVD, etc.
DT-500_EN_g 06.2.16, 9:59 AM 23