Security, Auto key lock, Direct call – Siemens S65 User Manual

Page 95: Only, Codes, This sim only b

Sieme

2003, L:\Mobil\R65\S65_

Penelope

_v2\en\fug\S65

_Se

curity.fm

Setup

VAR Langua

ge: en; V

R issue

date: 040517

left page (94)

of S65 FUG en, A31008-H7400-A1-1-7619 (21.01.2005, 10:09)

Setup

Security

Select function.

Auto key lock

The keypad is locked automatically if

no key has been pressed for one

minute in standby mode. This pre-

vents the phone from being used

accidentally. However, you can still

be called and you can still make an

emergency call.

Direct call

(Phone-code protected)
Only one phone number can be

dialled (see also p. 28).

Only

‚

(PIN2 or phone-code protected)
Dialling options are restricted to SIM-

protected phone numbers in the

Phonebook. If only area codes are

entered, relevant phone numbers

can be added to these manually

before dialling.
If the SIM card does not support PIN2

input, the whole Phonebook can be

protected with the phone code.

Codes

For description, see p. 18:

PIN control

Change PIN

Change PIN2

Chg.phonecode

This SIM only

(Phone-code protected)
The phone can be connected to a

SIM card once the phone code is

entered. Unless the phone code is

known the phone will not operate

with a different SIM card.
If the phone is to be used with a dif-

ferent SIM card, enter the phone

code when requested.

Additional information
The keypad can also be directly locked and

unlocked in standby mode.
In each case:

Press and hold.

S65 FUG en, A31008-H7400-A1-2-7619