Connectivity – Siemens S65 User Manual
Page 89
©
Sieme
ns
AG
2003, L:\Mobil\R65\S65_
Pe
nelope
_v2\en\fug\S
65
_Conne
ct
iv
ity.fm
Setup
88
VAR Langua
ge: en; V
A
R issue
date: 040517
left page (88)
of S65 FUG en, A31008-H7400-A1-1-7619 (21.01.2005, 10:09)
Setup
Connectivity
C
¢
T
¢
Connectivity
¢
Select function.
GPRS
b
(General Packet Radio Service)
C
Switch GPRS on/off.
GPRS is a method for transmitting
data faster in the mobile network.
Use GPRS and if the network has suf-
ficient capacity, you can be con-
nected to the Internet permanently.
The network provider charges only
for the volume of data transmitted.
Some service providers do not yet
support this service.
Shown in the display:
GPRS info
Display the transmitted volume.
IrDA
C
Activate/deactivate IrDA.
Your phone has an infrared inter-
face. With this interface, you can
exchange data such as pictures, ring-
tones, Addressbook entries, busi-
ness cards or organiser data with
other devices which also have an
infrared interface.
The infrared interface is on the left
side of the phone. The distance
between the two devices must not
exceed 30 cm. The infrared windows
in both appliances must be aligned
as accurately as possible with each
other.
Shown in the display:
¯
IrDA activated.
®
During transmission.
If IrDA is activated, standby time for
the phone will be reduced.
£
Activated and available.
¢
Registered.
¤
Temporarily interrupted.
S65 FUG en, A31008-H7400-A1-2-7619