Siemens S65 - Manual (Page 50)

©
Siem
ens AG
2003, L
:\Mobi
l\R65
\S
65
_Penelop
e_v2\e
n\f
ug\S65_SMS.fm
49 SMS
VAR Langua
ge: en; V
A
R issue
date: 040517
left page (49) of S65 FUG en, A31008-H7400-A1-1-7619 (21.01.2005, 10:09)
Setting
SMS signature
C
¢
M
¢
Message setup
¢
SMS
¢
SMS signature
You can enter a “signature” with up
to 16 characters. This signature will
then be attached to each SMS except
for a §Reply§ and when changes are
made to an existing SMS.
SMS profiles
C
¢
M
¢
Message setup
¢
SMS
¢
SMS profiles
Up to 5 SMS profiles can be set.
These define the transmission char-
acteristics of an SMS. The pre-setting
depends on the SIM card inserted.
Activate profile
I
Select profile.
C
Activate.
Set profile
I
Select profile.
§Edit§ Open to edit the profile.
Service
centre
Enter the phone numbers for
the service centre as provided
by the service provider.
Recipient Enter a standard recipient for
the profile.
Message
type
• Manual : Inquiry for all mes-
sages.
• Standard text : Normal SMS
message.
• Fax : Transmission via SMS.
• E-mail : Transmission via
SMS.
• New : You may need to
obtain the required code
number from your service
provider.
Validity
period
Period in which the service
centre is to try to deliver the
message:
Manual , 1 hour , 3 hours ,
6 hours , 1 day , 1 week ,
Maximum *
* Maximum period that the
service provider permits.
Status
report
=
Receive confirmation of suc-
cessful/failed transmission of a
message. This service may be
subject to a charge.
Direct
reply
=
If activated, the reply to your
SMS message is handled via
your service centre (for infor-
mation, please contact your
service provider).
SMS via
GPRS
=
Send SMS automatically via
GPRS (p. 88).
Save aft.
send
Sent SMS messages are
saved in the Sentbox list.
S65 FUG en, A31008-H7400-A1-2-7619