Siemens S65 - Manual (Page 28)

©
Siem
ens AG
2003, L
:\Mobi
l\R65
\S
65
_Penelop
e_v2\e
n\f
ug\S65_Phone.f
m
27 Calling
VAR Langua
ge: en; V
A
R issue
date: 040517
left page (27) of S65 FUG en, A31008-H7400-A1-1-7619 (21.01.2005, 10:09)
When the new connection is
established:
§Swap§ Swap between calls.
Incoming calls during a call
You may need to register for this
service with your service provider
and set your phone accordingly
(p. 83). During a call, you may be
advised that there is another call
waiting. You will hear a special tone
during the call. You have the follow-
ing options:
• Accept the waiting call in addition to
the first
§Swap§ Accept the waiting call,
putting the current call on
hold to do so.
Always proceed as above to swap
between the two calls.
• Reject the waiting call
§Reject§ Press.
Or
§Divert§ The waiting call is
diverted, for example, to
the mailbox.
• Accept the waiting call and end the
current call
B
End the current call.
C
Accept new call.
End call(s)
B
Press the End key.
After the Return to held call? display,
you have the following selection:
§Yes§ You accept the call on
hold.
§No§ You end the second call
too.
Conference
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be ena-
bled specially.
A connection has already been
established:
C
Open the call menu and
select Hold . The current
connection is maintained.
J
Now dial a new number.
When the new connec-
tion is established ...
C
... Open the call menu and
select Conference . The
held call is joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
S65 FUG en, A31008-H7400-A1-2-7619