SkyGolf SkyCaddie SGX - Manual (Page 19)

19
GPS reset System settings
Button Test Backlight Test
• Green At: Automatically switches to the IntelliGreen view when you reach a set distance. The default
to switch to IntelliGreen is 150 yards. You may adjust this setting from 50-500 yards.
• Targets First: Enabling this setting displays the target list from the tee first when you go to the next
hole (instead of displaying the IntelliGreen). The default setting is to display the IntelliGreen first.
• Green Ref: Sets the green target that you want to know the distance to when you make your approach
shot. When the Green Reference is set to “Front”, a small square will appear on the IntelliGreen where
the front is marked. The word “Front” will replace “Center” on target lists. The distance will be based
on the Front marker.
• Green Targets: Enable this option to display additional green targets (Example: Grn-RtCy, Grn-BackRt)
in the target list views.
• QuickVue: From here, you can toggle QuickVue OFF/ON.
4.2.6 System
System Settings offers additional configuration specific to the operation of the SGX.
• Reset to Factory: Resets
the SGX settings to the
factory defaults when “Yes”
is selected.
• Joystick Sel.: Allows you to
turn the selection function
of the Joystick ON or OFF.
When set to “ON”, you can
press the Joystick to select
on-screen options. When
set to “OFF”, you must use
the Left and Right Keys to
select options on the SGX.
• Clear Data: Erases Courses, Scoring and Membership data attached to the SGX. If you clear the data,
you will need to sync your SGX to restore your membership details on the device.
4.2.7 GPS
Selecting the GPS icon on the Settings Menu will take you to a GPS Reset screen. The reset option will
reset the GPS receiver. This function may be used while troubleshooting with SkyGolf Customer Support
or if you notice that your satellite signal appears to be poor. Press the Right Key under “Yes” to proceed
with the reset, or the Left Key under “No” to exit without a reset.
4.2.8 Diagnostics
Should you encounter any issues with the SGX, a SkyGolf
Customer Support representative may ask you to run the
Diagnostics tool. The Diagnostics tool will automatically
perform three tests: a LCD Test, a Backlight Test, and
a Button Test.
• The LCD Test determines whether the SGX’s high-
resolution TFT-LCD display has dead pixels, a blank
screen, or other problems. The test will cause the
screen to display all black, then all white.
• The Backlight Test checks the display’s backlight by
automatically scrolling through different brightness levels in 10% increments.
• The Button Test determines whether the SGX software recognizes keys when
you press them. During this test, every button you press should show the
name of that key on the display. To exit this test, press the Left Key twice.
4.2.9 Clock
Selecting this option on the Settings Menu will display the digital clock. Press the
Left Key beneath “Exit” to return to the previous screen.
Digital Clock
Clear Data