Sharp 36F630 - Manual (Page 7)

7
Dimension: 140mm x 215mm
Quick Reference Control Operation
• Part Names
Front Panel
Quick Reference Control Operation
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Control Functions
VOLUME UP/DOWN
(
k) Increases sound.
( l) Decreases sound.
POWER
Press
→ On.
Press again → Off.
Infrared Transmitter Window
MUTE
Press
→ Mutes sound.
Press again → Restores sound.
• When sound is muted, CLOSED
CAPTION appears if available.
SKIP/VCR-CH
(See page 41.)
POWER MENU – VOL + CH
PULL-OPEN
POWER MENU – VOL + CH
VOLUME UP/DOWN
(
k) Increases sound.
( l) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press
→ Accesses MAIN MENU.
Press again → Exits MAIN MENU.
POWER (DVD/VCR)
Press
→ On.
Press again → Off.
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR
→ Signals sent will be for
TV and VCR control.
Press CATV/DVD
→ Signals sent will be
for cable TV converter and DVD control.
DISPLAY
Press
→ Displays receiving channel for
4 seconds.
Press again
→ Removes display.
• Temporarily displays receiving channel
when in Closed Caption mode.
INPUT
Press
→ Switches to external video
INPUT 1 mode.
Press twice
→ Switches to external video
INPUT 2 mode.
Press 3 times
→ Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times
→ Switches back to the
original TV mode. See page 39.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter” command
after selecting channels, when using the
REMOTE KEYPAD button. (See page 41.)
CHANNEL UP/DOWN
(
a) Selects next higher channel.
( s) Selects next lower channel.
• See pages 28–30 for Channel Setting.
• Moves the “
E ” mark on the MENU
screens.
REC
(See page 41.)
VIDEO/AUDIO
TERMINALS
(INSIDE DOOR) IN 2
CHANNEL UP/DOWN
(
a) Selects next higher channel.
( s) Selects next lower channel.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons, you
can program your favorite programs by
using the 4 categories A, B, C and D. The
channels can be accessed quickly by using
these buttons. (See page 32.)
DVD/VCR CONTROL
See page 41.
POWER
Press
→ On.
Press again → Off.
MENU
Press
→ Accesses MAIN MENU.
Press again → Exits MAIN MENU.
REMOTE CONTROL
SENSOR
36F630(07) 03.3.5, 2:39 PM 7