beautypg.com

Notice, Antenna connections (continued), Cable tv (catv) connection – Sharp 36F630 User Manual

Page 6: Outdoor antenna connection, F-type connector should be finger-tightened only

background image

6

Dimension: 140mm x 215mm

OUT

A

IN

B

CABLE TV (CATV) CONNECTION

• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay

channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.

“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s

channel keys.

“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/

descrambler using the converter’s channel keys.

Note:

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that

might be required.

OUTDOOR ANTENNA CONNECTION

• Refer to one of the following two diagrams when connecting to an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.

• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.

A. Combination VHF/UHF Antennas

B. Separate VHF/UHF Antenna

Antenna Connections (Continued)

Cable TV converter/

descrambler

(not supplied)

Two-set
signal
splitter
(not
supplied)

Cable TV Line

RF switch (not supplied)

OUT

IN

F-type connector

75-ohm coaxial cable

When connecting the RF cable to the TV set, do not
tighten F-type connector with tools.
If tools are used, it may cause damage to your TV
set.
(The breaking of internal circuit, etc.)

F-type connector should be finger-tightened only.

NOTICE

75-ohm

coaxial cable

300-ohm
twin-lead

VHF/UHF ANTENNA

VHF/UHF ANTENNA

300/75-ohm
ADAPTOR
(Not supplied)

or

REAR OF TV

IN OUT

300-ohm
twin-lead

300-ohm
twin-lead

75-ohm coaxial

cable

VHF
ANTENNA

UHF
ANTENNA

COMBINER

(not supplied)

or

REAR PANEL

36F630(05-06)

03.3.5, 2:38 PM

6