Sonance Quintette 521QR - Manual (Page 3)

PAINTING THE SPEAKERS AND GRILLES
You can paint the speakers and grilles before installing them, which will
eliminate the “paint scar” if the speaker ever needs to be removed for
service. You can also paint the speakers after installation, but before the
grilles are attached. All Quintette speakers come from the factory fitted
with a plastic ‘paint plug’. Use the paint plug to protect the speaker
drivers while the flange is being painted along with the wall.
Sonance always suggests painting the grille separately from the speaker.
Before painting, carefully remove the under-grille cloth. It is held in place
with a light tacking glue that makes it easy to remove.
Spray the grilles with thinned paint (5 parts thinner to 1 part paint),
being careful not to plug the holes. Too heavy a coat of paint on the grille
will adversely affect the sound of the speaker.
Once the grilles and flange are painted and dry, replace the under-grille
cloth, remove the paint plug from the speaker flange and install the grille.
PIVOTING THE 522
QR
TWEETER
The Quintette 522 QR has a pivoting tweeter that allows you to direct
sound toward or away from the listening area.
If you’re using the speakers in stereo or as the front L/C/R speakers in a
home theater, you should pivot the tweeter directly towards the listening
area. This can be especially helpful if the speakers are widely-separated
and the music fails to blend into a central sonic image.
If you’re using the speakers as surround channel speakers in a home theater,
you can create a more diffuse, spacious surround effect by aiming the
tweeters towards a wall or window, away from the listeners.
To pivot the tweeter:
Apply light pressure on the oval plastic tweeter mounting ring, as shown
in Illustration 3.
Note: Do not touch or apply pressure to the tweeter dome.
SPECIFICATIONS
Quintette 522
QR
Tweeter ¾" (19mm) Cloth dome pivoting
Woofer 5¼" (133mm) Black polypropylene cone with a
rubber surround
Frequency Response 55Hz – 20 kHz ±3dB
Sensitivity 90dB (2.83V / 1 meter)
Power 5 watts minimum; 45 watts maximum
Impedance 8 ohms nominal; 6 ohms minimum
Grille Perforated aluminum
Dimensions (Dia x D): 8¼" x 3½" (210mm x 89mm)
Cutout Diameter: 6 7 /
8
" (175mm)
Weight 7.0 lbs (3.2 Kg) per pair
Quintette 521
QR
Tweeter 5 / 8 " (16mm) Polycarbonate dome
Woofer 5¼" (133mm) Black polypropylene cone with a
rubber surround
Frequency Response 60Hz – 20 kHz ±3dB
Sensitivity 88dB (2.83V / 1 meter)
Power 5 watts minimum; 45 watts maximum
Impedance 8 ohms nominal; 6 ohms minimum
Grille Perforated aluminum
Dimensions (Dia x D): 8¼" x 3½" (210mm x 89mm)
Cutout Diameter: 6 7 /
8
" (175mm)
Weight 7.0 lbs (3.2 Kg) per pair
3
I N S T R U C T I O N M A N U A L
S O N A N C E Q U I N T E T T E ® S E R I E S
5 ¼ ” I N - C E I L I N G S P E A K E R S
Illustration 3: Pivoting the 522 QR Tweeter