Savin 2045e User Manual
Page 34

Preparing to Print
28
2
-Bidirectional transmission
When bidirectional transmission is
enabled, information such as paper
size and feed orientation is automati-
cally sent to the computer. You can
also check machine status from your
computer.
• Bidirectional transmission is sup-
ported under Windows 95/98/Me,
Windows 2000/XP, and Windows
NT 4.0.
• When bidirectional transmission is
running, machine status and infor-
mation can be viewed by opening
the printer driver screen.
To support bidirectional transmis-
sion, the following conditions are re-
quired:
When connecting with a parallel cable
• The computer must support bi-
directional transmission.
• The machine must be set to bidi-
rectional transmission.
• The machine parallel port and
computer parallel port must be
connected using a parallel inter-
face cable that supports bidirec-
tional transmission.
Note
In Windows 95/98/Me,
[
Enable
bi-directional support for this print-
er
]
must be selected in
[
Spool Set-
tings
]
on the
[
Details
]
tab in
RPCS™ printer driver.
In Windows 2000/XP, or Win-
dows NT 4.0,
[
Enable bidirectional
support
]
must be selected, and
[
Enable printer pooling
]
must not
be selected on the
[
Ports
]
tab in
RPCS™ printer driver.
When connecting with the network
• The machine must be set to bidi-
rectional transmission.
• SmartNetMonitor for Client in-
cluded on the CD-ROM must be
installed.
One of the following conditions
must also be satisfied as well as the
two requirements mentioned
above:
• The port for SmartNetMonitor
and TCP/IP must be used.
• The standard TCP/IP port is
used without changing the port
name (Windows 2000/XP).
• The IP address specified in the
Microsoft TCP/IP Print is used
(Windows NT 4.0).
• The IP address is included in
port name, if using IPP proto-
col.
Note
In Windows 95/98/Me,
[
Enable
bi-directional support for this print-
er
]
must be selected in
[
Spool Set-
tings
]
on the
[
Details
]
tab in
RPCS™ printer driver.
In Windows 2000/XP, or Win-
dows NT 4.0,
[
Enable bidirectional
support
]
must be selected, and
[
Enable printer pooling
]
must not
be selected on the
[
Ports
]
tab in
RPCS™ printer driver.