Sanyo VCC-WB2000 - Manual (Page 45)

RS-232C Settings (RS-232C SET)
This sets the communication speed for the RS-232C connector of the camera when the camera is
connected to a computer for maintenance and servicing.
Click the [RS-232C] button in the main menu.
The RS-232C SET screen will be displayed. Select the communication
speed from the drop-down list box, and then click the [SET]
button. The setting will then be saved.
•
The default setting for the communication speed is 19200 bps.
Note: If you click the [LIVE VIEW] button, the display will return to
the live image screen.
STATUS Checking
This displays information about the camera status.
Click the [STATUS] button in the main menu.
The ALARM DATA LIST screen will be displayed.
Note: If you click the [LIVE VIEW] button, the display will return to the live image screen.
1
FIRMWARE VERSION
This shows the version number for the camera’s firmware.
2 SUB-MICROCOMPUTER VERSION
This shows the version number for the camera’s sub-microcomputer.
3 PCMCIA: SOCKET STATUS
This shows the usage status for the PC card slot.
1
2
3
ID3
ID3
L5AB2/US (VCC-WB2000) GB 2002, 7, 4
– 44 – English