Sanyo VCC-WB2000 - Manual (Page 42)

Alarm Setting
Playing Back Expansion Memory
Card Images
1
Click the [LIVE VIEW] button in the main
menu.
The live image screen will be displayed.
2
Click the ALARM DATA indicator while it
is red or green.
The ALARM DATA LIST screen will be
displayed.
The first image that was recorded will be
displayed in the PREVIEW screen.
The alarm data will be displayed in the
[ALARM DATA] list.
3
Click on an alarm filename in the [ALARM
DATA] column, and then click the [PLAY]
button in the PREVIEW screen.
The message “THE UNIT IS LOADING
ALARM DATA” will appear briefly, and when
loading is complete, playback will start
automatically.
Note:
•
If you turn off the power for the camera or
remove the expansion memory card while
alarm data is being recorded onto or
transferred from the memory card, the data
may become corrupted.
•
When turning off the power, make sure that
the camera has finished recording data onto
the memory card first.
Deleting Alarm Images
1
Click the ALARM DATA indicator while it
is red or green.
The ALARM DATA LIST screen will be
displayed.
2
Select the check boxes ( G ) for unneeded
alarms in the [ALARM DATA] column.
Note:
•
Up to 16 items of data can be selected.
•
Be sure to check the PREVIEW screen when
deleting image data. Once images have
been deleted, they cannot be restored.
3
Click the [DELETE] button.
The alarm data delete confirmation dialog
box will be displayed.
4
Click the [OK] button.
The selected alarm data will be deleted.
L5AB2/US (VCC-WB2000) GB 2002, 7, 4
English – 41 –