Sanyo VCC-WB2000 - Manual (Page 29)

LIVE VIEW Settings
Click the [LIVE VIEW] button in the main menu.
The live image screen will be displayed. The live image screen lets you
make settings such as alarm data detection and recording status, and also
for the image quality, compression ratio, image size and enlargement ratio
for the images that are being transmitted.
If selecting setting values for items from the drop-down list boxes, be sure to click the [SET] button
after making a selection.
1 Alarm detection and recording status
A ALARM indicator
•
Lit red (camera title)
During alarm recording
•
Lit orange (camera title)
Illuminates during pre-alarm recording and
while images are being copied to a memory
card
When recording of alarm images is finished, the
indicator switches off.
B ALARM DATA indicator
•
Lit red (camera title)
This indicates that alarm images have filled
the camera’s internal memory (16 MB) or
filled the memory card that has been
inserted into the PC card slot of the camera.
Alarm image playback is possible at this time.
•
Lit orange (camera title)
This indicates that alarm images are being
transferred from the camera’s internal
memory to the memory card, that alarm
recording is in progress, or that a memory
card error has occurred.
•
Lit green (NET_CAM)
This indicates that there is some free space
available in the alarm recording area when a
memory card is inserted into the camera.
Alarm image playback is possible at this time.
Note: Refer to “Alarm settings” for details
on checking alarm images and
alarms. (p. 35)
C CLOCK UNSET indicator
This indicates the time has not yet been set.
Accordingly, “UNSET” is displayed only when
the time has not been set, and it disappears
automatically once the time has been set. Click
the [CLOCK] button in the main menu to set the
time. (p.43)
2 1
3
4
5
ID2 ID1
L5AB2/US (VCC-WB2000) GB 2002, 7, 4
– 28 – English