Sony MHC-RX90 - Manual (Page 6)

6
Step 2: Setting the
time
You must set the time before using the timer
functions.
1
Press CLOCK/TIMER SET.
The hour indication flashes.
2
Turn the jog dial to set the hour.
The clock is on a 24-hour system.
3
Press ENTER/NEXT.
The minute indication flashes.
4
Turn the jog dial to set the minute.
Æ‚ ⁄
„ 0 )
1 3,5 2,4
Inserting two size AA (R6)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Hold down PLAY MODE and press
POWER so that "LOCK" appears in the
display.
}
}
]
]
Step 1: Hooking up the system
(continued)