Sony MHC-RX90 - Manual (Page 18)

18
Recording from a
tape
— High-speed Dubbing
3
Press EDIT/DIRECTION repeatedly
to select
A to record on one side.
Select a (or RELAY) to record on
both sides.
4
Press .
Dubbing starts.
To stop dubbing
Press on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set EDIT/DIRECTION to a when the
tapes you use have different lengths, the tape in
each deck reverses independently. If you select
RELAY, the tapes in both decks reverse together.
• You don’t have to set REPEAT/DOLBY NR, since
the tape in deck B is automatically recorded in the
same state as the tape in deck A.
You can use TYPE I (normal) or TYPE II
(CrO
2 ) tapes. The recording level is
automatically adjusted.
1
Press § EJECT and insert a
recorded tape in deck A and a blank
tape in deck B.
2
Press HIGH SPEED DUBBING.
Deck B stands by for recording.
With the side
you want to
play/record
facing forward
1 2 4 1
REPEAT/DOLBY NR
Ж‚
…
„ » Ж
⁄
⁄ ⁄
„ 0 )
…
„ » Ж
POWER
3
⁄
…
„ » Ж