Sony MHC-RX90 - Manual (Page 22)

22
Playing CDs without
interruption
–– Non-Stop Play/Applause Mix
You can play CDs without pausing between
tracks or you can mix the sound of applause
between tracks.
To Press
Check the CHECK on the remote
programme repeatedly. After the last
track, “CHECK END”
appears.
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the 1 Select the disc tray with a
programme DISC 1~3 button.
2 Select the track by
turning the jog dial.
3 Press ENTER/NEXT.
Clear the entire once in stop mode or
programme twice while playing.
Tips
• The programme you made remains in the CD
player even after it has been played back. Press
· to play the same programme again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20
– the total playing time has exceeded 100 minutes.
Programming the CD tracks
(continued)
Æ‚ ⁄
„ 0 )
POWER
2 3 1
1
Press FUNCTION repeatedly until
“CD” appears in the display, then
place a CD.
2
Press NON-STOP repeatedly to
select the mode you desire.
3
P r e s s · .
To cancel Non-Stop Play
Press NON-STOP so that “NON-STOP OFF”
appears in the display.
To Select
Play without NON-STOP PLAY
pausing between
tracks
Mix applause APPLAUSE MIX
between tracks