Sony MHC-RX90 - Manual (Page 13)

Basic Operations
13
Recording a CD
— CD Synchro Recording
With the side
you want to
record facing
forward
2 4 DISC SKIP
EX-CHANGE
The CD SYNCHRO button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) or TYPE II (CrO
2 ) tapes. The
recording level is adjusted automatically.
1
Press § EJECT and insert a blank
tape into deck B.
Ж‚
…
„ » Ж
⁄
⁄ ⁄
„ 0 )
…
„ » Ж
POWER
1 5 REPEAT/
DOLBY NR
3
2
Press § OPEN/CLOSE and place a
CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP
EX-CHANGE repeatedly so that it lights
green.
3
Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback.
·
(for front side) lights up.
4
Press EDIT/DIRECTION repeatedly
to select
A to record on one side.
Select a (or RELAY) to record on
both sides.
5
Press on deck B.
Recording starts.
To stop recording
Press on deck B or on the CD player.
Tips
• If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press REPEAT/
DOLBY NR so that “DOLBY NR B” appears after
pressing CD SYNCHRO.
Note
You cannot listen to other sources while recording.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
Ж‚ ⁄
„ 0 ) + =
⁄
…
„ » Ж