Sony MHC-RX90 - Manual (Page 12)

12
To Do this
Stop play Press ( p on the remote).
Pause Press · ( P on the remote).
Press again to resume play.
Select a track During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. Or press
+ (to go
forward) or = (to go back)
on the remote.
Find a point in Press and hold down ) or
a track 0 ( o r ) / 0 o n t h e
remote) during play and
release it at the desired point.
Select a CD Press a DISC 1~3 button or
in stop mode DISC SKIP EX-CHANGE.
Play only the Press 1/ALL DISCS
CD you have repeatedly until “1 DISC”
selected appears.
Play all CDs Press 1/ALL DISCS repeatedly
until “ALL DISCS” appears.
Remove the CD Press § OPEN/CLOSE.
Exchange other Press DISC SKIP
CDs while EX-CHANGE.
playing
Adjust the Turn VOLUME (or press VOL
volume +/– on the remote).
Playing a CD (continued) Tips
• Pressing · when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
· or the DISC 1~3 buttons (Automatic Source
Selection).
• If there is no CD in the player, “CD NO DISC”
appears in the display.
• When a disc tray is selected or the CD placed on
that tray is playing, the DISC 1~3 button for the
respective tray lights green.