Quick setup reference, Basic analog setup - with a single eq station – SIGMA EQ Station User Manual
Page 7
5
QUICK SETUP REFERENCE
... if you just need a quick basic setup guide.
Basic Analog setup
- with a single EQ Station
• Connect power and signal cables according to the
illustration above.
• Go to the Setup Page: I/O Configuration-Local I/O Setup-
I/O Mode and select “1-8 Thru” or “Mix/Matrix” according
to your application:
- 1-8 Thru - typical mode for monitor applications.
- Mix/Matrix - typical mode for Front Of house applications.
• Set relevant Inputs to Analog.
• Go to the Setup Page: I/O Configuration-ADA I/O
settings and set the ADA gain to match the connected
mixers Output.