Sony Ericsson G502 - Manual (Page 24)

24 Calling
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear. Wait
for the tone and say the command to
record. The voice command is played
back to you.
5 If the recording sounds OK, select Yes .
If not, select No and repeat steps
3 and 4.
To re-record a voice command
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice dialling > Edit names .
2 Scroll to a command and select Options
> Replace voice .
3 Wait for the tone and say the command.
Voice dialling
You can hear your recorded contact
name when you receive a call from
that contact.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialling without pressing any keys.
Your handsfree must be connected to
your phone when using the magic word.
To activate and record the magic word
1 From standby select Menu > Settings
> the General tab > Voice control
> Magic word > Activate .
2 Follow the instructions that appear and
select
Cont. Wait for the tone and say
the magic word.
3 Select Yes to accept or No for a new
recording.
4 Follow the instructions that appear and
select
Cont.
5 Select where your magic word is to be
activated.
To make a call using the magic word
1 In standby make sure is visible.
2 Say the magic word.
3 Wait for the tone and say a voice
command.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
You should choose a long, unusual word
or phrase that can easily be distinguished
from ordinary background speech.
Bluetooth handsfree does not support
this feature.
This is the Internet version of the User's guide. © Print only for private use.