Sunwave Tech. SRC-1600 - Manual (Page 37)

Troubleshooting
33
Problem solution
*Check you are holding the
target remote’s button until the
LED lights up to confirm this
function is learned.
*Do not teach the SRC-1600
near incandescent lights.
*Sometimes the code’s
frequency is out of the learning
range. The SRC-1600 cannot
learn all codes. You may not
be able to program the SRC-
1600 for some devices or
functions.
Macro does not work. *Check the correct device is
selected on the SRC-1600.
Check you are using the SRC-
1600 within the effective
transmission distance (8 ~ 10 m)
*The batteries may be
discharged. Replace the
batteries as described in
Installing batteries on page 4.
*Check that the macro is
programmed correctly. Re-
program the macro as
described in Creating Macros
on page 19.