Sunwave Tech. SRC-1600 User Manual

Page 18

SRC-1600 User’s Manual

Checking the code number

After automatically setting a preset code, you

can find the code’s number using the following
procedure. This is useful if your settings are

accidentally erased in the future.
1. Press and hold the

appropriate device button.

2. While holding the device

button, press and hold the
“1” button. The first digit of

the IR code number displays.

You can write the code

number down in order to

program it next time.

3. Repeat this by pressing 2, 3,

and 4 for the second, third

and forth digits of the code
number.

You can use this code number to program the

SRC-1600 if your settings are changed or
accidentally erased. See Manually setting preset

codes on page 13.

Code
Number 5