Sunwave Tech. SRC-1600 User Manual

Page 12

SRC-1600 User’s Manual

Loading preset codes using auto search

You can quickly start using your SRC-1600 by

using the auto search to load preset codes.

1. Switch on the device for which you want to

set up the SRC-1600.

2. Select the appropriate device on the SRC-

1600 using the device buttons. See Selecting

devices and pages on page 7.

3. Press and hold

for two seconds to enter

setup on the touch screen.

4. Press

5. Point the IR transmitter of the

SRC-1600 at the device then

press

6. The SRC-1600 will try to turn off the device by

transmitting different preset IR codes. When

the device switches off, immediately press
any hard button or touch the screen.

7. Ensure that you have the correct code by

pressing Volume +/-, Channel +/- or to test.
If the code is not correct, press "

" or "

and test the code again.

8. Press the

button to save and exit.