Sunwave Tech. SRC-1600 User Manual

Page 28

SRC-1600 User’s Manual

1. Press and hold the device

button of the device you are
currently operating.

2. While holding the device

button, press the VOL + or VOL–
button. The device icon flashes

on the touch screen.

3. While the device icon is flashing,

quickly press TV or RECV within

three seconds.

4. Punch thru has successfully

completed. When punch thru

has been set, the TV or RECV

icon will flash next to the device
icon of the device you are

operating to indicate the

volume control source.

NOTE:

• To remove the punch thru function, press the

device button and Volume+ or Volume -
together.

• The punch thru function can only be set with

the DVD, VCR, SAT, and AUX devices, and
enables you to control the volume of these
sources through the TV or RECV device.