Sunwave Tech. SRC-1600 - Manual (Page 20)

SRC-1600 User’s Manual
16
6. Aim the IR
transmitter of your
device’s remote
control at the
learning eye of
the SRC-1600.
7. Continually press the corresponding button on
your existing remote control until the SRC-1600
LED lights.
If the function is not learned correctly, the LED
flashes three times and the SRC-1600 emits a
triple beep. Do the relearning procedure
again.
8. When the code has been learned, the
SRC-1600 emits a beep and the LED on the
SRC-1600 lights until you release the button on
the device’s remote.
9. Repeat steps 5 – 8 for all the buttons you want
to program.
10. When you have finished, press .