Controlling the projector from web, Configuring the network setting, User controls – Sanyo PJLINK PDG-DXL100 User Manual

Page 33

English

User Controls

1. Fill in a new IP, a subnet mask, a gateway and a DNS in the

dialogue box.

2. Then choose apply and press “ENTER” button to effectuate the

configuration process.

3. Open your web browser and type in the IP address, it has entered

4. Input the user name and password then press “LOGIN” button

on the screen, the web page will display as below:

5. Open “Control Panel” to control your projector.

Controlling the Projector From Web

Configuring the Network Setting

When you used the

projector IP address,

you will can not link to

your service server.

Note

(1) User name:user /

Password:user

(2) User name: admin-

istrator / Password:

admin

Remark: Only admin-

istrator could enter the

Network setting and

alert setting.

Note