Sanyo PJLINK PDG-DXL100 - Manual (Page 21)

20
English
User Controls
The Projector has a multilingual On Screen Display that allows
you to make image adjustments and change a variety of set-
tings. The projector will automatically detect the source.
How to operate
1. To open the OSD, press “MENU” on the Remote Control.
2. When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
key to enter sub menu.
3. Use keys to select the desired item in the sub menu and
adjust the settings by key.
4. If the setting has icon, you could press “ENTER” to enter an-
other sub menu. Press “MENU” to close the sub menu after adjust-
ment.
5. After adjusting the settings, press “MENU” go back to the main
menu.
6. To exit, press “MENU” again. The OSD will be closed and the pro-
jector will automatically save the new settings.
On Screen Display
 If no button operation
is made for 30 seconds,
the OSD will be closed
automatically.
Note
Main Menu
Sub Menu Setting