Gearbox leaking damaged oil seal. replace seal, No oil seal. install oil seal, Oil too light. use ep140 – Servis-Rhino CY84 User Manual

Page 133: Bent shaft. replace oil seal and shaft, Oil seal race rough. replace shaft or repair race, Oil seal installed wrong. replace seal, Of seal, Bearings loose. adjust bearings, Vent plug stopped up. open vent plug, Oil level too high. drain oil to proper level

OPERATION

CY84 03/08

Operation Section 4-45

OPERA

ION

Gearbox Leaking

Damaged Oil Seal.

Replace Seal.

No Oil Seal.

Install Oil Seal.

Oil too light.

Use EP140.

Bent Shaft.

Replace Oil Seal and Shaft.

Oil Seal Race rough.

Replace Shaft or repair Race.

Oil Seal installed wrong.

Replace Seal.

Oil Seal not sealing in the housing.

Replace Seal or use a sealant on O.D.

of Seal.

Bearings loose.

Adjust Bearings.

Vent Plug stopped up.

Open Vent Plug.

Oil level too high.

Drain oil to proper level.

Gasket damaged.

Replace Gasket.

Bolts loose.

Tighten Bolts.

Driveline Integral Shields

Integral Shields deformed.

Replace Shield.

Rattling or Not Turning Freely

Nylon Bearing worn.

Replace Nylon Bearing.

Rapid Clevis Wear

Washer not used.

Install washers above and

below drawbar.

Clevis Bending or Spreading

Using Pin or Bolt not tightened.

Use 1” grade 5 or 8 Bolt & tighten Nut.

Open.