Sega WaveRunner GP User Manual
Page 37
www.seuservice.com
28
( 4 ) INPUT TEST
Selecting the INPUT TEST on the test mode
menu screen causes the screen (on which each
switch and V. R. are tested) to be displayed.
Press each switch. If the display beside each
switch indicates "ON," the switch and wiring
connections are satisfactory.
Check the display of each V.R. value. If the V.
R. is malfunctioning, refer to Sections 11 & 12.
( 5 ) OUTPUT TEST
In the output test mode, carry out lamp test to
ascertain that each lamp lights up satisfactorily.
( 3 ) SOUND TEST
In the test mode, selecting SOUND TEST
causes the screen (on which sound related BD
and wiring connections are tested) to be
displayed.
Be sure to check if the sound is satisfactorily
emitted from each speaker and the sound
volume is appropriate.
Perform the above inspections also at the time of monthly inspection.
SOUND TEST
RIGHT SPEAKER
OFF
LEFT SPEAKER
OFF
-> EXIT
SELECT WITH SERVICE BUTTON
AND
PRESS TEST BUTTON
INPUT TEST
HANDLE BAR
0H
ROLL
0H
THROTTLE LEVER
FFH
PITCH
0H
START
OFF
VIEW
OFF
SAFETY SENSOR
OFF
SERVICE
OFF
TEST
OFF
PRESS TEST AND SERVICE BUTTON TO EXIT
OUTPUT TEST
> START LAMP
OFF
VIEW LAMP
OFF
EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON