Speco Technologies CVC230HZ - Manual (Page 15)

+ Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
+ Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
+ Please select the area you wish to observe from the 4 areas in AREA SEL
mode.
+ Please select ON mode for the chosen area.
+ Please adjust the size of the area to be observed by using the UP, DOWN,
LEFT or RIGHT button.
+ Please press the SETUP button to save changes and complete the setting.
1. Press the SET button to access the main setup menu and then position
the indicator over FOCUS using the UP or DOWN button.
2. Press the SET button.
MAIN SETUP
CAM TITLE
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
OFF
ATW
OFF
OFF
┘
┘
┘
┘
 MODE: You can select the most suitable zoom mode. Move the arrow
indicator to ‘MODE’ using UP or DOWN button.
FOCUS SETUP
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
DISP ZOOM MAG
ONE-PUSH
ON
FAST
OFF
ON
┘
+ AUTO: Select auto and press the SET button to confirm. Increase or decre
ase optical zoom (ZOOM) or digital zoom (D-ZOOM) positions usin
g the UP or DOWN button while verifying the changes on screen. E
nabling D-ZOOM(ON) means that digital zoom will activate once op
tical zoom ends. Focus is automatically adjusted with moving zoom.