Speco Technologies CVC230HZ - Manual (Page 11)

3. Change the status of the selected feature using the LEFT or RIGHT button.
4. When completed, move the arrow indicator to ‘EXIT’ and press the SET button.
Use this feature to designate a name for the camera, which will display on the
monitor screen.
1. Press the SET Button to display the main setup menu and move the arrow indicator to
‘CAM TITLE’ using the UP or DOWN button.
2. Set ‘CAM TITLE’ to ‘ ON’ using the LEFT or RIGHT button.
MAIN SETUP
CAM TITLE
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
OFF
ATW
OFF
OFF
┘
┘
┘
┘
3. Press SET button.
CAM TITLE SETUP
ABCDEFGHIJKLMNO
PQRSTUVWXYZabcd
e f g h i j k l m n o p q r s
Tu v w x y z 0 1 2 3 4 5 6 7
89( ) < > - / # ! ? , .
  CLR POS END