Sanyo PJ LINK PLC-XU106 - Manual (Page 39)

39
Choose Video or S-video by pressing the INPUT button on
the top control, or the VIDEO button or the S-VIDEO button
on the remote control.
1 Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When video input signal is connected to the
VIDEO jack, select Video.
Video
When video input signal is connected to the S-
VIDEO jack, select S-video.
S-video
Note:
When the Input Search function is set to On 1 or On in
the Auto setup function, the input signal will be searched
automatically (p.47).
Top Control
INPUT button
Remote Control
VIDEO button
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼ buttons to select Input and
then press the Point
► or
the SELECT button.
Use the Point ▲▼ buttons to select either Video or
S-video and then press the SELECT button.
S-video button
Video
S-video
Video
Computer (RGB)
S-video
Computer 1(RGB) /
(Component) / (Scart)