Sanyo PJ LINK PLC-XU106 - Manual (Page 29)

9
Choose Computer 1(RGB) by pressing the INPUT button on the top control or press the COMPUTER 1 button
on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
1
Input Menu
3
Input Source Selection (Computer 1: RGB)
Computer Input
COMPUTER 1 button
Note:
When the Input Search function is set to On 1 or On in
the Auto setup function, the input signal will be searched
automatically (p.47).
Computer
1
Top Control Remote Control
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point ▲ ▼ buttons to select Input and
then press the Point
►
or the SELECT button.
Use the Point ▲ ▼ buttons to select Computer 1.
When Computer 1 is selected, press the Point
►
to
access the submenu items
. Use the Point ▲ ▼ buttons
to select the RGB input source and then press the
SELECT button.
Computer 1(RGB)
Computer 1(Scart)
Video
Computer (RGB)
S-video
Auto
Auto
INPUT button
Computer 1(RGB) /
(Component) / (Scart)