Setup, Connecting your monitor, Syncmaster 152x – Samsung 172x User Manual

Page 15

Text mode
Original mode

Connecting
Your Monitor

Installing the
Monitor Driver

Connecting Your Monitor

Using the Stand

Setup-General

1. Connect the DC Adapter for your monitor to the power port on the back of the monitor. Plug the

power cord for the monitor into a nearby outlet.

2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. Connect the monitor to the Macintosh computer using the D-SUB connection cable.
4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac

adaptor.

5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.

SyncMaster 152x

This manual is related to the following products:

152x