Sony DVP-F5 - Manual (Page 90)

Settings and Adjustments 90
x TRACK SELECTION
Gives the sound track which contains the highest number of channels
priority when you play a DVD on which multiple audio formats (PCM, DTS
or Dolby Digital format) are recorded.
• OFF : No priority given.
• AUTO : Priority given.
Notes
• When you set this item to “AUTO”, the language may change depending on the
“AUDIO” settings in “LANGUAGE SETUP.”
The “TRACK SELECTION“ setting has higher priority than the “AUDIO” settings
in “LANGUAGE SETUP” (page 81).
• If you select “DIGITAL OUT” in “AUDIO SETUP” and set “DTS” to “OFF,” the DTS
sound track is not played even if you set this item to “AUTO” and the highest-
numbered audio channel is recorded in DTS format.
• If PCM, DTS and Dolby Digital sound tracks have the same number of channels, the
player selects PCM, DTS and Dolby Digital sound tracks in this order.
• Depending on the DVD, the audio channel with priority may be predetermined. In
this case, you cannot give priority to the DTS or Dolby Digital format by selecting
“AUTO.”
x POWER SAVING (DVP-FX1 only)
Turns on and off the power saving function. If you turn on the power saving
function, the brightness of the LCD screen is reduced to conserve the battery
life of the battery pack.
• OFF : turns off the power saving function.
• ON : turns on the power saving function. The player can reduce the power
consumption by approximately 10 percent.
Note
Even if you set this item to “ON,” the display window lights up whenever:
– you set the LINE SELECT switch to “IN” to watch the picture from other equipment
– you turn on the player
Custom Settings (CUSTOM SETUP) (continued)