Sony DVP-F5 - Manual (Page 19)

19 Getting Started
Getting Started
Receiver (Amplifier) Hookups
This connection is for listening to the sound thr ough speakers
connected to a r eceiver lacking a built-in DTS or Dolby* Digital
decoder . Refer as well to the instr uctions supplied with the component
to be connected.
For DVP-FX1
Be sur e to set the LINE SELECT switch to OUT .
z You can enjoy surround sounds even if you connect fr ont speakers only
You can use 3D sound imaging to cr eate vir tual rear speakers fr om the sound of the
front speakers (L, R) without using actual r ear speakers (VES:V irtual Enhanced
Surround). For details, see page 60.
* Manufactur ed under license fr om Dolby Laboratories.
“Dolby,” “Pro Logic” and the double-D symbol ar e trademarks of Dolby
Laboratories.
Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights
reser ved.
Required cords
Audio/V ideo connecting cor d (supplied) (1)
S video cord (not supplied) (1)
When connecting the cor ds, be sur e to match the color -coded cor d to the
appropriate jacks on the components: Red (right) to Red and White (left) to
White. Connect the Black jack of the audio/video connecting cor
d to AUDIO
OUT (White) on the player . Be sur e to make connections fir mly to avoid hum
and noise.
If you have a digital component such as a r eceiver (amplifier) with a digital
connector , DAT or MD, connect the component via the OPTICAL OUT
connector using an optical digital connecting cor
d (not supplied).
Optical digital connecting cor d (not supplied) (1)
continued
Yellow
White (L)
Red (R)
Yellow
Black
Optical
mini-plug
Optical plug