Sony DVP-F5 - Manual (Page 102)

102
Additional Information
Symptom
The remote does not function.
The disc does not play.
VES (Virtual Enhanced
Surround) does not function.
The player does not play from
the beginning when playing a
disc.
Troubleshooting (continued)
Remedy
• Remove any obstacles between the remote and the
player.
• Use the remote near the player.
• Point the remote at the remote sensor on the player.
• Replace all of the batteries in the remote with new ones
if they are weak.
• When using the battery pack, press POWER on the
player to turn on it.
• When using the battery pack and 10 minutes have
passed after turning off the player, you cannot turn on
the player with the remote.
• Make sure you use the supplied remote.
• There is no disc inside (“Insert disc.” appears on the
screen).
Insert a disc.
• Insert the disc correctly with the playback side facing
down.
• Clean the disc.
• There is a flaw on the disc.
• The player cannot play CD-ROMs, etc (page 7).
Insert a DVD, a VIDEO CD, or CD.
• Check the region code of the DVD (page 6).
• Moisture has condensed inside the player. Remove the
disc and leave the player turned on for about half an
hour (page 10).
• Check that the player is placed in a horizontal position.
• The buttons on the player are locked. Slide HOLD back
to the off position.
• The LINE SELECT switch is set to IN. Set it to OUT.
(DVP-FX1 only)
• The headphone surround function is turned on.
Set HP SURROUND to OFF.
• Repeat Play, Shuffle Play or Program Play has been
selected. Press CLEAR (pages 68 to 73).
• Resume Play has been selected.
Press x on the player or on the remote before you start
playing (page 35).
• A title menu or a DVD menu automatically appears on
the TV screen when you play your DVD, or a setup
display automatically appears on the TV screen when
you play your VIDEO CD with PBC functions.
Operation